Glass Door Repair
$150 - $400 | 30-90 minutes | Available 24/7
Triton Locksmith repair commercial glass doors including patch fittings, floor springs, pivot hinges, locks, and closers for $150-$400. Frameless herculite doors, aluminum-frame glass doors, and glass storefront entries. 30-90 minutes on-site.
What Glass Door Hardware Do We Repair?
Patch fittings, floor springs (Dorma BTS75, Rixson 27), top pivots, bottom pivots, glass door locks, and hydraulic closers. We don't replace the glass itself, but we handle everything that makes the glass door swing, close, lock, and hang properly.
Frameless glass doors (herculite) are common in professional offices, salons, and boutiques in Boca and Fort Lauderdale. The patch fittings clamp the glass to the floor spring and top pivot. When these loosen or the floor spring fails, the door sags, wobbles, or stops closing. We repair or replace the hardware.
Types of Commercial Glass Door Repairs
- Patch fitting repair: Patch fittings are the metal brackets that hold frameless (herculite) glass doors to the frame and floor. They loosen, crack, or break from daily use. Triton Locksmith replaces patch fittings and realigns the door.
- Floor pivot/closer repair: Glass doors commonly use floor pivots and closers instead of traditional hinges. When the floor closer fails, the door swings freely or does not close. We repair or replace the mechanism.
- Top rail/header repair: The aluminum rail at the top of frameless glass doors houses the top pivot and keeps the glass aligned. Damaged rails cause the door to shift and bind.
- Lock repair/replacement: Storefront locks on glass doors require specialized narrow-profile hardware. Adams Rite and other narrow-stile locks fit the thin aluminum stile.
- Aluminum frame adjustment: Thermal expansion in South Florida causes aluminum-frame glass doors to bind seasonally. We adjust the frame, rollers, and hardware to accommodate expansion.
Frameless vs. Aluminum-Frame Glass Doors
Frameless (herculite) glass doors use tempered glass panels with patch fittings, top rails, and floor pivots. They are common in boutiques, salons, and professional offices. Repairs focus on the hardware (patch fittings, pivots, locks) not the glass itself.
Aluminum-frame glass doors have a full aluminum frame surrounding the glass panel. They are common in storefront entries, office buildings, and strip malls. Repairs include frame adjustment, alignment, roller replacement, and lock service.
Common Glass Door Problems in South Florida
- Door scraping the floor: Worn floor pivot bearing or shifted cement case. We adjust or replace the pivot hardware.
- Door not latching: Misalignment between the lock and strike. We adjust the door alignment and strike plate.
- Door swinging too fast/slow: Floor closer speed out of adjustment or hydraulic fluid degraded. We adjust or replace the closer.
- Patch fitting cracked: Metal fatigue from daily use. We replace the fitting and re-secure the glass panel.
How Much Does Glass Door Repair Cost?
- Patch fitting replacement: $150-$300
- Floor pivot/closer repair: $200-$400
- Top rail replacement: $150-$300
- Lock repair/replacement: $95-$250
- Aluminum frame adjustment: $95-$200
- Complete glass door hardware overhaul: $400-$800
Where Does Triton Locksmith Repair Glass Doors?
Retail stores, restaurants, salons, office lobbies, and any building with commercial glass doors. Boca Raton, Coral Springs, Coconut Creek, Fort Lauderdale, West Palm Beach. Same-day service. Call (561) 524-8500.
Glass Door Maintenance for South Florida Businesses
South Florida heat, humidity, and salt air create unique challenges for commercial glass doors. Aluminum frames expand in the heat and contract at night, causing hardware to loosen over time. Salt air corrodes steel components (pivots, screws, patch fitting bolts) faster than in inland locations. Triton Locksmith recommends semi-annual maintenance for glass doors at coastal properties and annual maintenance for inland locations across Boca Raton, Coral Springs, Coconut Creek, Fort Lauderdale, West Palm Beach.
During maintenance visits, Triton Locksmith lubricates all pivot points, tightens patch fittings, checks floor closer oil levels, adjusts closing speed, and verifies lock function. This preventive approach extends hardware life from 3-5 years to 8-10 years in South Florida's demanding climate. Call (561) 524-8500 to schedule glass door maintenance.
Triton Locksmith is the go-to glass door hardware specialist for retail stores, office lobbies, and professional offices across Broward and Palm Beach counties. We carry patch fittings, floor closer parts, pivot hardware, and narrow-stile lock components on every service van. Most glass door repairs complete same-day on the first visit.
For emergency glass door hardware failures where the door cannot close or lock, Triton Locksmith provides priority 24/7 dispatch to secure the opening. If the glass panel is broken, we secure the opening with boarding and coordinate glass replacement the following business day.
Common Questions
How much does commercial glass door repair cost?
Patch fitting replacement: $150-$300. Floor pivot repair: $200-$400. Lock repair: $95-$250. Aluminum frame adjustment: $95-$200. Depends on the specific issue.
Can you fix a glass door that scrapes the floor?
Yes. Usually a worn floor pivot bearing or shifted cement case. Triton Locksmith adjusts the pivot height or replaces the bearing.
Do you replace glass panels?
Triton Locksmith repairs the hardware, not the glass itself. For cracked or broken glass panels, we coordinate with a glass company while we handle all the door hardware.
What is a patch fitting on a glass door?
A metal bracket that connects a frameless glass door to the frame or floor hardware. Patch fittings clamp onto the glass and hold it in position.
Can you add a lock to a frameless glass door?
Yes. We install glass door locks, patch lock fittings, and floor locks for frameless (herculite) glass doors.
Why does my glass door not close all the way?
Usually a floor closer issue. The hydraulic mechanism is losing control. Triton Locksmith adjusts or replaces the floor closer to restore proper closing.
Do aluminum-frame glass doors need different repair than standard doors?
Yes. They use narrow-stile locks, aluminum-specific hardware, and are affected by thermal expansion. Triton Locksmith specializes in storefront and aluminum-frame door repair.
Can South Florida heat affect glass door operation?
Yes. Thermal expansion causes aluminum frames to expand, which can cause binding and misalignment. Triton Locksmith adjusts the hardware to accommodate seasonal temperature changes.
How long does glass door repair take?
Patch fitting or pivot repair: 1-2 hours. Lock repair: 30-60 minutes. Full hardware overhaul: 2-4 hours.
Do you service sliding glass doors at commercial buildings?
Yes. Commercial sliding glass doors (not residential patio doors) with track systems, rollers, and commercial locks. We repair rollers, tracks, and locking hardware.
Related Services
Triton Locksmith provides this service across 25 cities in Broward and Palm Beach counties. Licensed, insured, and bonded with over 20 years of locksmith experience and 252 five-star Google reviews. Same-day service with upfront pricing. Call (561) 524-8500 for fast, professional locksmith and door hardware service anywhere in South Florida. Available 24/7 at the same rate with no surcharges for nights, weekends, or holidays.
Need Glass Door Repair?
We're on call 24/7 across 25 South Florida cities.
(561) 524-8500