Storefront Lock Service
$95 - $300 | 30-60 minutes | Available 24/7
Triton Locksmith install and repair storefront locks including Adams Rite narrow-stile mortise locks, storefront deadbolts, and aluminum door hardware for $95-$300. We work on glass storefronts, aluminum frame doors, and commercial entry doors across South Florida.
What Storefront Lock Types Does Triton Locksmith Service?
Adams Rite deadbolts, narrow-stile mortise locks, storefront latches, and commercial glass door hardware. Storefronts use different lock styles than standard doors because the aluminum frames are narrow (typically 1-3/4" wide). Standard cylindrical locks don't fit. Adams Rite MS1850 is the most common storefront deadbolt in South Florida. Triton Locksmith carries replacements and parts.
- Adams Rite MS1850 deadbolt: The standard storefront deadbolt. Hook bolt design grabs the strike keeper even if the door has slight play in the frame. Most retail stores in Boca Raton and Coral Springs use this lock.
- Adams Rite MS1890 deadlock: Similar to MS1850 but with a deadlocking latch that prevents shimming. Better security for stores with high-value inventory.
- Narrow-stile mortise locks: Full mortise lock body fits inside the narrow aluminum stile. Combines a latch and deadbolt in one unit. More secure but more complex to service.
- Herculite (frameless) glass door locks: Patch fittings, floor locks, and top rail locks for frameless glass doors. Common at boutiques, salons, and professional offices.
- Storefront lever handles: Commercial-grade lever sets designed for narrow aluminum stiles. Different from standard commercial levers.
What Are Common Storefront Lock Problems?
Cylinders wearing out from daily use, deadbolts not throwing fully, and glass door locks misaligning. Retail stores get 50-100+ door cycles per day. That wears through hardware faster than a residential door that gets opened 10 times. Triton Locksmith sees storefront locks fail after 3-5 years of heavy commercial use.
The most common issues we fix:
- Key won't turn smoothly: Cylinder is worn. We replace the cylinder or the entire Adams Rite deadbolt depending on condition. $95-$200.
- Deadbolt won't throw fully: The strike keeper is misaligned or the bolt mechanism is worn. Triton Locksmith adjusts the strike or replaces the lock body.
- Glass door won't latch: Door sag from a worn pivot or patch fitting. The lock mechanism is fine, but the door has shifted. We adjust the pivot or replace the patch fitting to realign the door.
- Key broke off in the lock: We extract the broken piece, decode the remaining key, and cut a new one. If the cylinder is damaged, we replace it. See our commercial lockout service.
Can You Upgrade Storefront Locks to High-Security?
Yes. Medeco and Mul-T-Lock both manufacture cylinders compatible with Adams Rite narrow-stile locks. Restricted keyway cylinders prevent employees and former tenants from copying keys at hardware stores. Triton Locksmith is an authorized dealer for both brands. High-security storefront cylinders cost $150-$300 per door installed.
For retail stores carrying high-value merchandise (jewelry stores, electronics retailers, pharmacies), Triton Locksmith recommends combining a high-security cylinder with a heavy-duty strike keeper. The standard Adams Rite strike keeper is aluminum and can be forced with a pry bar. An upgraded steel strike keeper adds significant forced entry resistance for about $50-$75 additional.
Storefront Lock Maintenance
High-traffic retail doors need annual lock inspections. The Door and Hardware Institute (DHI) recommends annual inspections for commercial doors with 30,000+ cycles per year. Triton Locksmith includes storefront locks in our lock maintenance contracts. During each visit, we test bolt throw, cylinder function, strike alignment, and door closer operation. Preventive maintenance extends hardware life from 3-5 years to 8-10 years in retail environments.
South Florida's high humidity and salt air significantly accelerate corrosion on storefront hardware, especially in coastal cities like Deerfield Beach, Pompano Beach, and Fort Lauderdale. Regular lubrication and cylinder replacement on a scheduled basis prevents expensive emergency repairs when a lock seizes up on a busy Saturday morning.
How Much Does Storefront Lock Service Cost?
- Cylinder replacement: $95-$150
- Adams Rite MS1850 deadbolt replacement: $125-$200
- Full narrow-stile mortise lock replacement: $175-$300
- Storefront rekeying: $95-$125 per lock
- Herculite glass door lock repair: $125-$250
- Emergency storefront lockout: $95-$175
Where Does Triton Locksmith Service Storefronts?
Retail stores, restaurants, salons, professional offices, and strip malls across South Florida. From Mizner Park in Boca Raton to the Coral Square area of Coral Springs and downtown Fort Lauderdale storefronts. Triton Locksmith services all 25 cities across Broward and Palm Beach counties including Coconut Creek and West Palm Beach. Same-day service on all storefront lock repairs, replacements, and rekeying. Call (561) 524-8500.
Common Questions
How much does it cost to replace a storefront lock?
Adams Rite deadbolt replacement: $125-$200. Full mortise lock replacement: $175-$300. Cylinder-only replacement: $95-$150. We carry common models in the van.
Can you fix a glass door that won't lock?
Yes. Usually it's the door patch fitting or the floor pivot causing misalignment. Once the door hangs properly, the lock engages. We adjust the hardware and test it.
Do you service aluminum frame doors?
Yes. Aluminum storefronts are our specialty. We work on narrow-stile hardware from Adams Rite, Kawneer, and other commercial door manufacturers.
Can you rekey a storefront lock?
Yes. Triton Locksmith rekeys Adams Rite and other storefront cylinders on-site. Same process as any other commercial rekeying, just a different cylinder format. $95-$125 per lock.
What is an Adams Rite lock?
Adams Rite manufactures narrow-stile mortise locks and deadbolts designed specifically for aluminum-frame glass doors. The MS1850 hook bolt deadbolt is the most common storefront lock in South Florida commercial buildings.
Can you install a high-security cylinder on a storefront door?
Yes. Medeco and Mul-T-Lock make Adams Rite compatible cylinders with restricted keyways. Prevents unauthorized key copying at hardware stores. $150-$300 per door.
How long does storefront lock replacement take?
30-60 minutes for a standard Adams Rite deadbolt swap. Full mortise lock replacements that require new door prep take 60-90 minutes.
Do you repair herculite (frameless) glass door locks?
Yes. Patch fittings, floor locks, top rails, and pivot hardware for frameless glass doors. Common at boutiques, salons, and professional offices across South Florida.
Can you add a deadbolt to a storefront that only has a latch?
Yes. Triton Locksmith installs Adams Rite MS1850 deadbolts on aluminum-frame doors. Requires drilling the door frame for the bolt pocket, which we do on-site.
Do you offer emergency storefront lockout service?
Yes. 24/7 storefront lockout service for $95-$175. Triton Locksmith opens the door non-destructively and can rekey or replace the lock on the same visit if needed.
Related Services
Need Storefront Lock Service?
We're on call 24/7 across 25 South Florida cities.
(561) 524-8500