Gate Lock Installation

What Types of Gate Locks Does Triton Locksmith Install?

Manual deadbolts, keypad locks, magnetic locks, gravity latches, and electronic gate openers. The right choice depends on the gate material, how often it's used, and whether you need key-free access. Pool gates in Florida also have specific code requirements for child safety that we'll cover below.

Here's what we install, organized by gate type:

• Driveway gates: Heavy-duty deadbolts or keypad locks rated for outdoor use. For long driveways, we install solar-powered keypad systems that don't need wiring. $175-$350 installed.
• Pool gates: Self-closing, self-latching hardware that meets Florida Building Code. Magna-Latch or D&D Technologies gate closers with key-lockable latches. $150-$300 installed.
• Garden/side gates: Standard deadbolts or padlock hasps for simple security. $120-$200 installed.
• Courtyard gates: Decorative lever or thumb-latch hardware with keyed locking. $150-$275 installed.
• Electric gate locks: Magnetic locks or electric strikes wired to a keypad, intercom, or remote. $250-$500 installed.

Standard interior door locks won't survive on a gate in South Florida. The salt air, humidity, UV exposure, and rain eat through cheap hardware in under a year. We only install outdoor-rated hardware with stainless steel or marine-grade finishes. Lockey and CodeLocks make the best gate-specific keypad models we've tested.

What Does Florida Code Require for Pool Gate Locks?

Florida Building Code Section 454.2.17 requires self-closing, self-latching gates around swimming pools. The latch must be at least 54 inches from the ground on the pool side so children can't reach it. The gate must swing away from the pool (outward), not toward it. And the gate must close and latch on its own without any human assistance.

This isn't optional. It's law. According to the Florida Department of Health, drowning is the leading cause of death for children ages 1-4 in Florida. Every year, families lose children because of non-compliant pool barriers. We install code-compliant pool gate hardware and check every requirement before we leave.

What we check during every pool gate lock installation:

• Gate self-closes from any open position (we adjust the hinge closer tension)
• Latch engages automatically without assistance
• Latch release height is 54 inches or higher on the pool side
• Gate swings outward (away from pool)
• No climbable features within 4 feet of the latch
• Gap beneath the gate is less than 4 inches

How Much Does Gate Lock Installation Cost?

$120-$350 depending on the lock type and gate material. Here's the pricing breakdown:

• Manual deadbolt on wood or metal gate: $120-$175
• Gravity latch with keyed lock: $100-$150
• Pool gate self-closing latch (code compliant): $150-$300
• Outdoor keypad lock (Lockey or CodeLocks): $200-$350
• Electric gate lock with keypad or remote: $250-$500
• Gate lock repair (existing hardware): $75-$150

Can You Install a Keypad Lock on a Gate?

Yes. This is one of our most popular gate upgrades. A keypad lock on a gate means no key to carry, no key to lose, and easy code changes when you need to give or revoke access. We install Lockey mechanical keypad locks and CodeLocks electronic keypads.

Lockey's mechanical keypads don't need batteries or wiring. They're purely mechanical, powered by the push of the buttons. Perfect for gates far from the house where running electrical isn't practical. The downside: code changes require disassembly. They're best for codes that don't change often.

CodeLocks electronic keypads need batteries (2-3 year life) but allow easy code changes from the keypad itself. No app, no wiring, no Wi-Fi. Just push a programming button and enter the new code. Better for rental properties, pool areas, and situations where codes change frequently.

What Gate Materials Can You Install Locks On?

Wood, aluminum, wrought iron, vinyl/PVC, chain link, and steel. Each material requires different mounting hardware and drill bits. Wood gates are the easiest. Wrought iron requires drilling through solid metal and welding or bolting mounting plates. Chain link gates need special adapter plates.

In South Florida, aluminum and PVC gates are most common because they resist corrosion. Wrought iron looks great but needs regular maintenance to prevent rust. Wood gates swell and warp with humidity. We factor in the gate material when recommending hardware because a lock that works great on wood may not be suitable for aluminum.

Do You Repair Existing Gate Locks?

Yes. Gate lock repairs run $75-$150. Common problems: rusted latches, broken springs, misaligned strikes, and locks that won't turn after rain exposure. South Florida weather is brutal on outdoor hardware. If the lock is repairable, we'll fix it. If the mechanism is too corroded or the housing is cracked, we'll recommend replacement and handle it on the same visit.

We also repair and adjust self-closing gate hinges. If your pool gate isn't closing on its own anymore, it's usually a worn hinge closer or misaligned hinge pins. We carry D&D Technologies TruClose and MagnaLatch replacement parts for the most common pool gate hardware.

Where Does Triton Locksmith Install Gate Locks?

Anywhere across Broward and Palm Beach counties. Homes, HOA communities, commercial properties, and rental properties. We install gate locks in Boca Raton, Coral Springs, Wellington (equestrian properties), Southwest Ranches (ranch gates), Parkland, and 43 other cities. Average response: 20 minutes. Call (561) 524-8500.

Related Services